Bernina 590#
Overview#
The Bernina 590 is an easy-to-use embroidery machine. It can be used with any color embrodery thread, for designs up to 5 x 9 inches! It is perfect for making custom shirts, hoodies, and similar.
If you are looking to embroider faster, or on more complex mediums like hats, consider checking out the Bernina E16, our more advanced embroidery machine.
Make sure to check out the Embroidery Software Page for more information on the embroidery software and best practices.
Prerequisites for Use#
Safety Warnings#
Please read all of the following before continuing;
Needle can move quickly, keep hands clear of needle at all times.
Do not place hand in needle area when powered.
Needle automatically moves, do not service needle without powering down machine
Machine moves quickly and can grab loose material or hair.
Wear short sleeves or roll up long sleeves.
Secure loose clothing.
Tie up and tuck in long hair.
Remove lanyards, jewelry, gloves, etc.
Broken needles can fly off of the machine.
Keep face clear of machine when powered.
Reference Videos#
Machine Overview#
Warning
NEVER remove the embroidery arm from the 590 while the machine is powered on. It can result in permanent damage!
Threading the Machine#
The 590 is threaded identically to the Bernina 475, please reference that page for information on threading.
In Person Competency Check#
To demonstrate competency on this machine, makers will walk through embroidering a design with a staff member. This can be a design for their own project, or a demonstration one from the makerspace.